The 4 Steps of Air Conditioning Installation

Installing an air conditioner can be a complicated and time-consuming process that can take several days. However, if you understand the basic installation steps, you will be able to give proper instructions to the craftsmen and supervise the installation process. However, it is better to entrust this procedure to local air conditioning repair. Let’s look at all the steps of air conditioning installation.

Photo credit: 123rf

The first and most important step of air conditioning installation is the preparatory work. At this stage, you need to determine where to install the air conditioner and prepare it for installation. If you are installing an air conditioner in a new house, you should make sure that the installation of pipes and cables for the unit has been done at the construction stage.

If you are installing the air conditioner in an already-built house, you need to determine where the unit will be installed and how the pipes and cables will be routed. Also, at this stage, you need to install the mounts for the outdoor air conditioner unit and prepare the place for its installation.

The next step is to install the indoor unit of the air conditioner on special mounts and connect it to the outdoor unit with the help of pipes and cables. The indoor unit must be installed at an optimum height and in a place where it will not interfere with your life.

Cassette unit

The cassette unit is installed in a suspended ceiling and is most common in commercial and office spaces. When installing a cassette unit, craftsmen do the following:

• Checking the capacity of the ceiling and the possibility of installing the cassette unit in it.
• Installation and connection of the ceiling box, which serves to install the cassette unit.
• Installing the cassette unit in the ceiling box and securing it in place.
• Connecting the power supply and piping the air conditioner.

Wall unit

The wall unit is the most common in residential areas. When installing a wall unit, masters perform the following actions:

• Determining the installation site and choosing the best place to place the unit.
• Installing the bracket and fixing the wall unit to it.
• Connecting the power supply and piping the air conditioner.
• Installation of the cover to protect the bracket and piping.

Duct unit

The ducted unit is installed in ceiling cavities and is most commonly used in office spaces. When installing a duct unit, the masters do the following:

• Determining the location of the duct unit and installing the installation box.
• Installing the channel unit in the box and fixing it in place.
• Installation of piping and electrical cables to connect the air conditioner.
• Installation of air grilles through which the air exits from the duct unit.

Then specialists install the outdoor unit on special mounts and connect it to the indoor unit with the help of pipes and cables. Also at this stage, the air conditioner should be connected to the mains and checked to make sure it works properly.

In this step, the craftsmen start the air conditioner and check its operation. If there are any problems, the craftsmen will diagnose and fix them. Also, at this stage, the air conditioner’s operating parameters, such as temperature and airflow rate, are adjusted. It is important to remember that adjusting the air conditioner is a very important stage of installation, which can affect the longevity and efficiency of the air conditioner. Therefore, it is necessary to entrust this work only to experienced craftsmen.

Air conditioner installation is a complex and time-consuming process that requires some knowledge and experience. But if you understand the basic steps of installation, you will be able to monitor the installation process and make sure that everything is done correctly. Don’t forget that proper air conditioner installation and tune-up is the key to its longevity and efficient operation.

Published in: Home advice | Author: Yanita